User Tools

Site Tools


3d_printer_specs

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
3d_printer_specs [2017/10/04 15:49]
admin [AirWolf Axiom Dual]
3d_printer_specs [2017/10/04 15:49] (current)
admin [AirWolf Axiom Dual]
Line 2: Line 2:
   * Bed Size   * Bed Size
   * Nozzle Leveling:   * Nozzle Leveling:
-   * Turn 2.5mm hex screw on right side of hot-end assembly. Tightening the screw raises the right nozzle. ​+    ​* Turn 2.5mm hex screw on right side of hot-end assembly. Tightening the screw raises the right nozzle. ​
 ====== AirWolf HDx ====== ====== AirWolf HDx ======
   * Bed Size   * Bed Size
3d_printer_specs.txt ยท Last modified: 2017/10/04 15:49 by admin