User Tools
heat_set_inserts_for_3d_printing
Table of Contents
Components
- Soldering Iron
- Heat Set Insertion Tip
- Heat Set Insert
Modeling In CAD
- Create a hole
- Set type to countersunk
- Set countersink angle to 8 degrees
- The hole can be as long as neeeded
- Dimension (B) is the top of the countersink
- Dimension (A) is the hole diameter
Common Dimensions
- 4-40: A=.047“, B= 0.0523”
- 10-32: A=0.247“, B=0.277”
heat_set_inserts_for_3d_printing.txt · Last modified: 2016/01/25 16:34 by admin
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
