User Tools
laser_cutting
Table of Contents
Laser Cutting
Black Plastic
- Applications: Lens Hoods for GoPro.
- Material: Staples Poly Pocket Folder Item: 431489 Model: 21638-CC/20633
Marking
- Mode: Vector
- Speed: 100%
- Power: 5%
- Frequency: 2500Hz
- Color: Green
Scoring
- Mode: Vector
- Speed: 100%
- Power: 8%
- Frequency: 2500Hz
- Color: Red
Cutting
- Mode: Vector
- Speed: 100%
- Power: 50% (Could be lower)
- Frequency: 2500Hz
- Color: Black
Black 1/8" Acrylic
Marking/Engraving
- Mode: Raster
- Speed: 100%
- Power: 40% (No Film) / 30% (Film On)
- Dither: Jarvis
- DPI: 400
Cutting
- Mode: Vector
- Speed: 15%
- Power: 100%
- Frequency: 5000Hz
- DPI: 400
PET (Polyester) Transparency Film
Cutting
- Mode: Raster
- Speed: 60%
- Power: 100%
- DPI: 400
- Dithering: Stucki
65lb Black Cardstock (Wausau Paper Creative Collection)
Cutting
- Mode: Raster
- Speed: 50%
- Power: 100%
- DPI: 1200
- Dithering: Standard
- Mode: Vector
- Speed: 100%
- Power: 50%
- DPI: 400
Engraving/Marking
- Mode: Raster
- Speed: 100%
- Power: 40%
- DPI:400
- Dithering: Jarvis
1" 2lb Black Polyethelyne Foam
- Applications: Case foam for pelican cases.
Cutting
It is imperative that the compressor is on for foam cutting
- Mode: Vector
- Speed: 17
- Power: 100
- Freq: 5000
- DPI: 400
Black ABS Plasic
- Application: Pelican Case Labels
Engraving
- Mode: Raster
- Speed: 100%
- Power: 35%
- Dither: Jarvis
- DPI: 400
Mahogany
Engraving
- Mode: Raster
- Speed: 100%
- Power: 60%
- Dither: Jarvis
- DPI: 600
Powder Coated Aluminum
Engraving
- Mode: Raster
- Speed: 100%
- Power: 100%
- Dither: Jarvis
- DPI: 600
laser_cutting.txt · Last modified: 2016/06/04 20:54 by admin
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
